|
[Sponsors] |
June 1, 2006, 06:31 |
temperature limited to 5.000e+03 ?
|
#1 |
Guest
Posts: n/a
|
Hello
I am simulating h2/o2 combustion in a diffusing flame using Eddy Dissipation ( h2+0.5o2=h2o) the problem is very sensitive to "initial conisitons", but every time the message "temperature is limited to 5.000e+03" appears after some interations while converging. 1- what does the message means really ? 2- if the convergence is achieved, the message will affect the final solution ? thank you for your help |
|
June 1, 2006, 08:11 |
Re: temperature limited to 5.000e+03 ?
|
#2 |
Guest
Posts: n/a
|
Find the cells where the temperature is so high and try to refine the mesh ...
|
|
June 1, 2006, 13:25 |
Re: temperature limited to 5.000e+03 ?
|
#3 |
Guest
Posts: n/a
|
Please check the enthalpies of the components. The maximum temperature can not be higher than adiabatic flame temperature.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TEMPERATURE LIMITED problem | emanuele | FLUENT | 9 | June 15, 2018 10:45 |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
temperature limited - absolute pressure limited | Asashi | FLUENT | 3 | July 18, 2014 09:51 |
temperature limited to 1.0e-00 in 10 cells | fabolous | FLUENT | 1 | July 14, 2010 13:48 |
the sign "temperature limited to sth..." | Kwang | FLUENT | 0 | October 21, 2007 06:18 |