CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   How could I get partical motion trajectory? (https://www.cfd-online.com/Forums/fluent/41257-how-could-i-get-partical-motion-trajectory.html)

 Peter Mate June 4, 2006 11:38

How could I get partical motion trajectory?

I need to simulate the motion of some partiles in rotating cylinders. Problem Discription: The cylinders was placed horizonly instead of vertically. The space between the inner and outer cylinder was filled with fluid such as water. The cylinders rotate around the axis with same or different angular velocity.

Objectives: 1、The flow field should be obtained. 2、If there are some solid particle(such as spherical structure) is inclued in the system, the particle will rotate with the fluid. How could I get its motion trajectory. Which model should I select, ALE or VOF? 3、The particle may effect the flow field profile if it is large enough. How could I get the critical size(such as diameter) that the particle can be neglected. Thanks a lot.

 Richard June 5, 2006 07:41

Re: How could I get partical motion trajectory?

1 it is easy to set moving wall boundary. 2 DPM is useful for particle trajectory 3 you should try or calculate the mass fraction of particle good luck

my blog: http://richard001.blogspot.com/

 Peter Mate June 6, 2006 06:25

Re: How could I get partical motion trajectory?

Thanks a lot,Richard. I have got the flow field profile. Now I'm working on the DPM model.

 All times are GMT -4. The time now is 06:05.