CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Lift coefficient Plot for turbine blade- Reg

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 19, 2006, 04:17
Default Lift coefficient Plot for turbine blade- Reg
  #1
Mahendran.M
Guest
 
Posts: n/a
Hi

I want to plot the lift coefficient over a turbine blade surface. I need help on the above matter.

Thanking you

  Reply With Quote

Old   June 19, 2006, 22:25
Default Re: Lift coefficient Plot for turbine blade- Reg
  #2
Fabrice
Guest
 
Posts: n/a
Hi,

You can do as followed:

solve->monitor->force.

Tick "plot" if you want to plot the result during the calculation, tick "write" if you want to save a file.

Be aware of setting the reference values (Report->reference values) otherwise your results will be completely wrong!!

Regards,

Fabrice.
  Reply With Quote

Old   June 19, 2006, 23:43
Default Re: Lift coefficient Plot for turbine blade- Reg
  #3
Mahendran.M
Guest
 
Posts: n/a
Dear Fabrice

Thanks for you reply.But I don't want to monitor the lift force on the surface.I want to draw a lift coefficient plot from Blade leading edge to trailing edge on pressure surface.

Thanking you
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coefficient of Lift vs flapping cycle phase plot Rose Siemens 2 December 20, 2011 07:24
Lift coefficient in Eulerian multiphase model hennas FLUENT 1 July 4, 2011 17:50
Calculating lift force of a wind turbine blade problem LittleBart CFX 4 June 29, 2011 03:33
Automotive test case vinz OpenFOAM Running, Solving & CFD 98 October 27, 2008 09:43
Zero Coefficient of Lift Problem MH FLUENT 0 February 25, 2007 12:48


All times are GMT -4. The time now is 13:07.