FloWizard - problems in meshing -- CFD Online Discussion Forums

June 21, 2006, 05:55	FloWizard - problems in meshing	#1
Mark Guest Posts: n/a	Hi! I've got a component realized in Catia. I have tried to mesh it in Catia Adanced Meshing Tool ambient and it has been succesful! I have also tried to mesh it in other ambient and it's ok. So I tried to import the component (saved as .igs ) in FloWizard... I've tried in any way, but the result is also the same: error and prograqm unable to mesh the component! Don't I use something to convert the mesh generated by Catia (exported as .dat ) in a useful mesh format that FloWizard is able to import? I can send the .igs by mail if somebody wants to try and mesh it using FloWizard.... Thanks!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems of Icem meshing about Conical Forebody	raja2010	ANSYS Meshing & Geometry	2	December 6, 2010 09:20
[snappyHexMesh] Problems meshing a pipe	U.Golling	OpenFOAM Meshing & Mesh Conversion	2	November 30, 2010 05:24
CFX meshing aspect ratio problems	akash_morar	CFX	3	November 13, 2010 22:41
Problems with Meshing: Collapsed Cells	Emmanuel Resch	Siemens	1	July 30, 2007 03:02
Meshing problems???	Nish	CFX	3	August 22, 2000 02:57

All times are GMT -4. The time now is 08:26.