CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Porous jump BC

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 6, 2006, 09:45
Default Porous jump BC
Posts: n/a
Hi everyone

I'm trying to simulate the flow inside a tube which has a specific injector. In my experimental set up, the tube is closed with a paper filter. In this way I have 3 BC : a pressure inlet (0.5bar overpressure), a porous jump and a pressure outlet(atmospheric pressure). My simulation is running for incompressible flow, but for compressible flow I always have the message :"divergence in amg solver : temperature".

I've tried a lot of solutions I found on this forum but I've still the same problem.

Does someone have an idea????
  Reply With Quote

Old   July 6, 2006, 11:07
Default Re: Porous jump BC
Posts: n/a
Have you tried with a little under relaxation factor on the energy equation? I`m working too on a similar project, with pressure doesn`t work very well...
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] How can I define different zones in ICEM? llrr ANSYS Meshing & Geometry 14 February 12, 2017 14:44
Porous Jump creation problem mulfal OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 4 December 9, 2013 12:59
Porous jump in urban environment samygero FLUENT 0 February 14, 2011 19:26
Porous Jump Naresh FLUENT 0 April 25, 2007 15:36
Testing the integrity of POROUS media and por jump Azman FLUENT 0 July 31, 2006 11:11

All times are GMT -4. The time now is 18:48.