Elbow 3D with Gambit !!

July 7, 2006, 04:40

I'm asking how to make an elbow 3D in Gambit?

July 8, 2006, 13:37

create a circular face. then create an edge along the centreline of the elbow using arc function. finally, sweep the face along the edge to create the 3d elbow volume.

July 9, 2006, 16:54

hi see the Gambit tutorial your cas is in it!!! good luck

bhavinshah36 · January 16, 2014, 06:09

can anyone help in making the geometry of 3D elbow?
as sweeping circular face along the edge through center creating problem after geometry got completed.

July 7, 2006, 04:40	Elbow 3D with Gambit !!	#1
Walid Guest Posts: n/a	I'm asking how to make an elbow 3D in Gambit?

July 8, 2006, 13:37	Re: Elbow 3D with Gambit !!	#2
Aidan Guest Posts: n/a	create a circular face. then create an edge along the centreline of the elbow using arc function. finally, sweep the face along the edge to create the 3d elbow volume.

July 9, 2006, 16:54	Re: Elbow 3D with Gambit !!	#3
Aniss Guest Posts: n/a	hi see the Gambit tutorial your cas is in it!!! good luck

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Velocity profiles problem behind the elbow (3D problem)	kabat73	FLUENT	8	May 9, 2010 05:26
Gambit 2.3.16, Xming or Exceed...HELP!	bambam3417	FLUENT	10	May 7, 2010 13:39
Gambit software > how to construct an elbow ?	Frank	FLUENT	2	September 16, 2008 11:27
Modelling 3D elbow in Gambit	Karthik	FLUENT	2	September 4, 2008 10:39
Creating 3D Elbow Geometry in GAMBIT	Shubha	FLUENT	3	June 2, 2008 12:28

January 16, 2014, 06:09		#4
bhavinshah36 New Member Bhavin Shah Join Date: Sep 2013 Posts: 2 Rep Power: 0	can anyone help in making the geometry of 3D elbow? as sweeping circular face along the edge through center creating problem after geometry got completed.