|
[Sponsors] |
July 10, 2006, 22:49 |
how to active Temperature equation in FLUENT
|
#1 |
Guest
Posts: n/a
|
when i importing a FLUENT 4 grid file into Fluent 6.0, i get the following message:Temperature equation is not active (conducting walls are treated as walls). so, how to active the temperature equation or how to exchange the wall cells into solid. pls help me. thank u!
|
|
July 12, 2006, 01:51 |
Re: how to active Temperature equation in FLUENT
|
#2 |
Guest
Posts: n/a
|
I thhink that in fluent4, you should change your conducting wall in live cell excepted for the boundary condition where the conducting wall is taken as a "normal" wall. Normally, if you do that, when you import your case in Fluent6, you should have two zones and a "shadow" wall between these two zone.
Good luck |
|
July 17, 2006, 10:05 |
Re: how to active Temperature equation in FLUENT
|
#3 |
Guest
Posts: n/a
|
Thanks for PIfou74, I'll try it. Best wish for you!
|
|
July 17, 2006, 10:49 |
Re: how to active Temperature equation in FLUENT
|
#4 |
Guest
Posts: n/a
|
Dear PIfou74, thanks for your help again! the fluid cell is defined live cell first in my programme. when i change the conducting wall into live cell , FLuent can not distinguish the two types. and i can not define the physical properties of the conducting wall. THX for your help!
|
|
July 17, 2006, 13:26 |
Re: how to active Temperature equation in FLUENT
|
#5 |
Guest
Posts: n/a
|
I think that now, in Fluent6, you should have two fluid zone? One for the "real" live and one for the zone corresponding to the conducting wall. You just have to change this second zone properties in order that it becomes solid.
If you have not the two zones this is not normal. In Fluent4, when you change the conducting wall cells to live you should define as wall the cells at the interface between the live and the conducting wall. Good luck |
|
July 18, 2006, 03:01 |
Re: how to active Temperature equation in FLUENT
|
#6 |
Guest
Posts: n/a
|
oh, yeah, i see. Thanks my dear friend,PIfou74. Bless you!
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transport Equation for temperature variance | ameya | OpenFOAM Running, Solving & CFD | 0 | December 5, 2008 02:16 |
how solve a scalar equation with Fluent | tomik | FLUENT | 0 | January 5, 2006 07:38 |
HELP!:CFD modelling using FLUENT in swimming pool | Tee | Main CFD Forum | 0 | September 7, 2005 21:48 |
Can FLUENT solve our own defined equation | Sebeci | FLUENT | 3 | April 22, 2003 16:20 |
Granular temperature equation | ap | FLUENT | 0 | April 18, 2003 14:30 |