|
[Sponsors] |
July 11, 2006, 05:40 |
Tecplot with Fluent
|
#1 |
Guest
Posts: n/a
|
I am exporting fluent data (v6.2.16) to tecplot(v.10) and when i want to open the data in tecplot it gives me the message below (but not in all the files): Err: Err: Bad or missing FE Cell Indices for cell 160 Error occurred on line 396 near position marked with "@" below: 216 215 215 @
That is the last line of the file!!! So i open the file and i compare it with those files wich donīt give me anyproblem are exactly the same structure,... Can anybody help me? Thanks |
|
July 11, 2006, 06:58 |
Re: Tecplot with Fluent
|
#2 |
Guest
Posts: n/a
|
Have you tried importing directly ".cas" and ".dat" into Tecplot using (Fluent Data Loader)?
Igor |
|
July 11, 2006, 16:37 |
Re: Tecplot with Fluent
|
#3 |
Guest
Posts: n/a
|
no, i am pretty new here... how can i do that?
|
|
July 12, 2006, 09:53 |
Re: Tecplot with Fluent
|
#4 |
Guest
Posts: n/a
|
I did it, but now i can not make the contours of the tangential velocity, i think that i have a new variable f(Velocity_x_,Velocity_y_) but i donīt know how to relate it. Thank you, Rafael
|
|
July 15, 2006, 07:26 |
Re: Tecplot with Fluent
|
#5 |
Guest
Posts: n/a
|
in fluent data loader we can just have option for few varaibles and original surface.
i am also facing same problem for fluent 6.2 and techplot, i guess tht it is bug in fluent 6.2. |
|
July 16, 2006, 16:32 |
Re: Tecplot with Fluent
|
#6 |
Guest
Posts: n/a
|
yes I confirm it is a bug. Luca
|
|
July 20, 2006, 04:28 |
Re: Tecplot with Fluent
|
#7 |
Guest
Posts: n/a
|
just change the type of element to "triangle",and it will work
|
|
June 27, 2009, 10:26 |
|
#8 |
New Member
Dhiraj K. Mahajan
Join Date: Jun 2009
Posts: 2
Rep Power: 0 |
Hi,
The below solution may not hold only to fluent based Tecplot file generation but in general for TECPLOT DATA files. In my Data file, I saw that this error is coming when I was not allocating the proper format to variable values. e.g. I was first using %15.5f for printing nodal variable values in TECPLOT DATA file, I realized that my data is not limited to 15 spaces but more. So their was no single empty column between different variables values of same node. I then changed the format to %20.5f and got empty column between different variables value for same node throughout the data file. this way the above error stopped coming!! hope it will help someone. cheers, dhiraj |
|
June 27, 2009, 11:58 |
|
#9 |
New Member
Anubhav Sinha
Join Date: Jun 2009
Posts: 1
Rep Power: 0 |
qianzd is right.
You have to change the elements type to triangles in techplot. It will not effect your final result or any variable, but after changing in triangles (click on option triangularization) you will be able to see the plots. Its strange but it works, or may be you are having some other problems which others are trying to suggest, jut check what is your real problem and try these sols. Best of luck - Anubhav |
|
June 27, 2009, 13:51 |
|
#10 |
New Member
Dhiraj K. Mahajan
Join Date: Jun 2009
Posts: 2
Rep Power: 0 |
Hi,
I should have mentioned my problem earlier. I have a mesh with tetrahedron elements ( some thing that I get in atomistic simulations), while plotting the data in tecplot I see this error coming and google gave me the link to this discussion. The solution mentioned in the forum before my reply does not hold for me but by thoroughly investigating my data file I found the solution to my problem as mentioned in my above reply. let me know for any further query. cheers, dhiraj |
|
July 23, 2010, 12:33 |
same problem
|
#11 |
Member
Jagmohan Meena
Join Date: May 2009
Posts: 30
Rep Power: 16 |
Hi, i am having the same problem..and as you said Mr. Mahajan, I looked into the format and it is okay. Tecplot is showing error on the last line of file. help required.
Thanx Jagmohan Meena |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Reading Additional Data Quantities from Fluent into Tecplot | fremder | Tecplot | 9 | December 16, 2016 15:35 |
how to read fluent Cl and Cd data in tecplot | lalit kumar | FLUENT | 0 | August 29, 2010 07:47 |
few quesions on ANSYS ICEMCFD and FLUENT | Prakash.Paudel | ANSYS | 0 | August 12, 2010 12:07 |
postprocessing Fluent Tecplot | unknown | FLUENT | 0 | October 11, 2009 06:34 |
Fidap to Fluent | Ravi | FLUENT | 3 | July 10, 2008 13:31 |