CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Liquid-gas separation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 14, 2006, 10:30
Default Liquid-gas separation
  #1
Easycad
Guest
 
Posts: n/a
Hi All! I need your advices on following multiphase problem. The problem is to model gas-liquid separation process taking place in a vessel. Liquid, containing both dissolved gases and bubble gases, enters the vessel, gets separated and then degassed liquid and gas are removed through two separate ducts. Both liquid and gas are multicomponent. The goal is determine if there is enough time for the phases to separate and how vessel geometry affects this. Temperature, pressure is const, heat of evaporation is negligible. As to me I have to use steady eulerian multiphase model, mass transfer should be taken into account through DEFINE_EXCHANGE_PROPERTY macro (I have a little understanding how to do it). Still dont know what to do with bubbles. So wating for your advices!
  Reply With Quote

Old   August 15, 2006, 01:58
Default Re: Liquid-gas separation
  #2
Easycad
Guest
 
Posts: n/a
I think it is convenient to consider liquid as a single component, but gases not. Gases have different volatility so evaporate at different rates.
  Reply With Quote

Old   August 29, 2006, 07:53
Default Re: Liquid-gas separation
  #3
Albert S.
Guest
 
Posts: n/a
I have very similar problem, any advances? Would be nice if we work together.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Gas dissolution from liquid phase with CFX Roger Young CFX 2 May 6, 2008 08:37
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 23:02


All times are GMT -4. The time now is 16:19.