CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Problems on Compiling UDF in FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   October 3, 2006, 23:34
Default Problems on Compiling UDF in FLUENT
Posts: n/a
Dear all :

I am facing a very inrritating problem while compiling the UDF file for a dynamic mesh of a 2D part. It cant find the file, where i can hook it..

Can anyone help ?
  Reply With Quote

Old   October 4, 2006, 02:50
Default Re: Problems on Compiling UDF in FLUENT
Posts: n/a
The dynamic mesh UDF's can be hooked in the 'Dynamic Zones' panel. e.g.

Define > Dynamic > Mesh Zones

If your problem is that the UDF does not appear in the drop down menu than you should make sure that it is loaded to the case you're currently working on. To load the UDF manually, make sure the library folder in which the UDF was compiled to is in the same directory as the case file. Then open the manage UDF's panel,

Define > User-Defined > Functions > manage...

Once you load it the UDF should appear in the drop down list in the Dynamic Zones panel.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF in Fluent Andrew Fluent UDF and Scheme Programming 5 March 7, 2016 04:38
Error while running UDF - Fluent roca Fluent UDF and Scheme Programming 2 March 7, 2013 03:30
UDF Data access problems Mosheraa FLUENT 4 June 17, 2011 14:16
problems on multi-file udf compiling phoenixchen903 FLUENT 1 August 30, 2009 03:35
Pb with simple Fluent UDF example for inlet francois FLUENT 0 October 9, 2008 11:34

All times are GMT -4. The time now is 05:59.