CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Hey Fluent WIZARDS !! Need help here

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 16, 2006, 05:21
Default Hey Fluent WIZARDS !! Need help here
Posts: n/a
Need to ask you a question regarding a turbulent natural convection scenario inside a large hall.

Now, the simple question is: Does the k-w (Shear Stress Transport) model account for turbulent generation due to buoyancy?. In the fluent manual, the two-equation set for k and w do not show the term that accounts for buoyancy effect, unlike what you see in k-epsilon equations. While not sure about this, I understood from the manual that when I activate the k-w model, the software applies the k-w model for low Re regions and applies the k-e model in the free stream with buoyancy effect. Is this correct?.

Thanks in advance for your help.

Cheers Amr

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Abaqus - Fluent Coupling WITHOUT MPCCI s.mishra FLUENT 1 April 5, 2016 06:47
Fluent3DMeshToFoam simvun OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 48 May 14, 2012 05:20
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 12:07
Fidap to Fluent Ravi FLUENT 3 July 10, 2008 13:31

All times are GMT -4. The time now is 09:37.