# BC :pressur inlet

 Register Blogs Members List Search Today's Posts Mark Forums Read

 October 31, 2006, 07:51 BC :pressur inlet #1 aniss Guest   Posts: n/a Hi all, how to set total pressur inlet and total temperature inlet in incompressible flow entring pipe i have static temperatur,static pressur and nember of Re. thanks for all

 November 1, 2006, 05:19 Re: BC :pressur inlet #2 salar askari Guest   Posts: n/a Hi for incompressible flow,we have; p0=p+.5dv^2(1) h0=h+v^2/2 or cpT0=cpT+v^2/2 thus: T0=T+v^2/(2cp)(2) where p0=total pressure,p=static pressure,d=density,v=velocity magnitude,T0=total temperature,T=static temperature,cp=constant pressure specific heat coefficient. since velocity and static temperature are known,using above equations you can find p0 and T0.Note that for incompressible flow cp=cv=c(approximately)and you can use equation(2)for both liquids and gases.Re=VD/v wher V=velocity magnitude,D=pipe diameter,v=cinematic viscousity coefficient Re,D and v are known thus:V=Rev/D. From: Salar Askari ,University of science and technology,Thern,Iran.

 November 1, 2006, 12:36 Re: BC :pressur inlet #3 aniss Guest   Posts: n/a thank's very well

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post lorenz FLUENT 3 March 15, 2012 08:26 jola FLUENT 1 May 5, 2011 14:33 aeroman CFX 12 August 6, 2009 18:42 Sachin Siemens 1 March 26, 2008 11:22 chong chee nan FLUENT 0 December 29, 2001 06:13

All times are GMT -4. The time now is 18:30.