CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Help: averaging in one direction

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 10, 2006, 14:44
Default Help: averaging in one direction
Posts: n/a
Dear all,

I have a small question.

My calculation domain is a rectangular duct.

10m(streamwise)* 2m(vertical)*5m(spanwise).

I have got the converged solution using FLUENT.

If I want to get the spanwise averaged mean velocity, is there any simple way in FLUENT? or other postprocessing software like tecplot?

More specificly, I'd like to get the spawise averaged mean velocity at x=1m, x=4,x=8m.

Any sugestion is welcome.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Starting field averaging using libFunctionObject after certain time eelcovv OpenFOAM Programming & Development 25 December 7, 2015 23:28
[CFD POST ] Averaging Values for one direction max3.2 CFX 6 May 4, 2011 14:15
[ICEM] Changing edge direction la7low ANSYS Meshing & Geometry 2 June 7, 2010 13:26
Averaging field over a spatial direction fs82 OpenFOAM 10 August 12, 2009 10:44
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15

All times are GMT -4. The time now is 05:19.