CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

suction and blowing boundry condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 14, 2006, 22:50
Default suction and blowing boundry condition
  #1
brusly
Guest
 
Posts: n/a
hi all

can any one tell me how to set the blowing and suction BC in the wall.

thanks in advance
  Reply With Quote

Old   November 15, 2006, 03:51
Default Re: suction and blowing boundry condition
  #2
wabik
Guest
 
Posts: n/a
Hi,

Blowing it could be INLET and sucking OUTLET ?!

PW
  Reply With Quote

Old   November 15, 2006, 04:19
Default Re: suction and blowing boundry condition
  #3
Vincent
Guest
 
Posts: n/a
Unfortunately Fluent does not support suction or blowing through walls.
  Reply With Quote

Old   November 16, 2006, 06:13
Default Re: suction and blowing boundry condition
  #4
brusly
Guest
 
Posts: n/a
thank you very much
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Velocity boundary condition: negative value (suction) val46 OpenFOAM 5 May 9, 2012 00:40
suction and blowing BC sheila FLUENT 3 September 3, 2007 04:49
BoundaryLayer with blowing Max Nutini FLUENT 2 August 9, 2000 06:21


All times are GMT -4. The time now is 02:16.