|
[Sponsors] |
December 7, 2006, 23:45 |
compressed porous media, need help
|
#1 |
Guest
Posts: n/a
|
I have a 2D cylinder with a moving top wall (only moving down) and a solid stationary bottom wall, the 2 walls on the sides are pressure outlet boundary conditions. in the interior of the cylinder, I want to have a porous media (can I also add fluid in the porous media). As the cylinder comes down, the porosity should should decrease (does fluent do this automatically internally or do I have to define a UDF), as a result fluid comes out through the presure outlet boundary conditions. I have been reading fluent tutorials and so on. Can this be done and can someone help me with this.
Thank you |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiphase Porous Media Flow - Convergence Issues | VT_Bromley | FLUENT | 7 | May 14, 2020 17:34 |
Porous media setup issues in Fluent | Bernard Van | FLUENT | 29 | January 26, 2017 05:09 |
How to model granular flow through porous media | Axius | FLUENT | 2 | August 7, 2014 11:34 |
species mass source in porous media ? | PK | FLUENT | 0 | February 16, 2007 12:12 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 16:16 |