CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

multiphase euler model (fluid-gas)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 11, 2006, 14:23
Default multiphase euler model (fluid-gas)
  #1
Jan
Guest
 
Posts: n/a
hey,

I want to simulate the evaporation of a fluid in a tube. I want to use the euler model (and maybe the mixture model).

With this model I have to define the diameter of the secundary phase (in my case the vapor phase). What is a good value for this? Will the diameter you set in, change during the simulation, with this I mean will Fluent see this value as an initial guess?

thanks Jan
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using) balu@gold6 FLUENT 4 July 26, 2012 11:37
MULTIPHASE - FREE SURFACE & MIXTURE MODEL Aris FLUENT 3 April 28, 2009 12:46
euler model CN FLUENT 0 July 4, 2005 17:35
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 23:02


All times are GMT -4. The time now is 04:06.