CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Whats wrong with the fluent webinars?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 18, 2006, 18:38
Default Whats wrong with the fluent webinars?
  #1
Kelly
Guest
 
Posts: n/a
http://www.fluent.com/elearning/reso...binars_cfd.htm

Everytime I click on play this webinar and fill in my details it gives me a 403 error and doesnt play th webinar?1
  Reply With Quote

Old   December 19, 2006, 12:39
Default Re: Whats wrong with the fluent webinars?
  #2
Phil
Guest
 
Posts: n/a
I just tried and it worked like a trick!

It could be one of many reasons: 1. You need to enable activex controls 2. You need the latest version of Java installed 3. You will need admin rights to change either of the above settings!

Also, the webminars are generally large video files, so a slow connection might make things worse.

P.S: 4. You need to eneter fake details! (LOL)
  Reply With Quote

Old   December 19, 2006, 15:29
Default Re: Whats wrong with the fluent webinars?
  #3
Kelly
Guest
 
Posts: n/a
Im in the uk perhaps thats the reason. You are in the US I presume?
  Reply With Quote

Old   December 21, 2006, 09:48
Default Re: Whats wrong with the fluent webinars?
  #4
Phil
Guest
 
Posts: n/a
You might want to call up your local Fluent office and find out if that is a problem. I don't think they would restrict the webinars to US alone, but then again, I could be wrong as I always am when it comes to Fluent!

Phil
  Reply With Quote

Old   December 28, 2006, 08:27
Default Re: Whats wrong with the fluent webinars?
  #5
Jim Clancy
Guest
 
Posts: n/a
Kelly,

I guess nothing to do with being in US or UK. I'm in the UK and things work fine.

Jim
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
udf error srihari FLUENT 1 October 31, 2016 15:18
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 03:44
Compared MRFSimpleFoam and Fluent in a centrifugal pump! renyun0511 OpenFOAM Running, Solving & CFD 8 July 6, 2010 07:24
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
[Commercial meshers] Wrong face orientations after conversion from fluent mesh stevecollie OpenFOAM Meshing & Mesh Conversion 6 July 14, 2008 08:20


All times are GMT -4. The time now is 21:41.