CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

spray injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 10, 2007, 05:57
Default spray injection
  #1
mmacrb
Guest
 
Posts: n/a
hi i am modelling spray injection in 3D.i am using cone injection.i am having problem with spray pattren.i was using cylindrical mesh and fuel was injecting along the axis of the cylinder.the spray pattren was good like a hallow cone. but when i inject in some place other than axis of the cylinder. the whole spray pattren is disturbed. i have also tested spray in square mesh.here if i am injecting at the meeting point of four cells the spray divided into four streams. if i inject in the middle of the cell it donot make hallow cone. it goes stright.

i want hallow cone spray at half angle of 30°.what should i do so that i dont have above problem of changing spray parren with change of point of injection
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parameter Spray Injection sheintz STAR-CD 0 April 1, 2010 08:30
Spray injection and depth of penetration sheintz STAR-CD 1 March 30, 2010 04:09
Spray injection and errors sheintz STAR-CD 3 March 18, 2010 11:33
Urgent help needed with spray injection nick Siemens 14 June 29, 2008 19:48
Spray Injection usker Siemens 2 April 6, 2007 01:41


All times are GMT -4. The time now is 08:38.