CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mixture type material as a phase material

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 25, 2007, 11:49
Default mixture type material as a phase material
  #1
Pablo
Guest
 
Posts: n/a
Hi all.

I'm simulating the evaporation and devolatilization (heat and mass transfer) in a fixed bed biomass gasifier usign the eulerian model. In order to do this, I have to assign a mixture type material for both phases, and when I do that my case diverges.
  Reply With Quote

Old   January 25, 2007, 11:54
Default Re: mixture type material as a phase material
  #2
Pablo
Guest
 
Posts: n/a
Any suggestion ?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help with boundary conditions: open to atmosphere Wolle OpenFOAM 2 April 11, 2011 08:32
[Other] cgnsToFoam problems with "QUAD_4" cells lentschi OpenFOAM Meshing & Mesh Conversion 1 March 9, 2011 05:49
rhoSimpleFoam claco OpenFOAM 7 April 20, 2010 05:32
Flow Around a Cylinder ronaldo OpenFOAM 5 September 18, 2009 09:13
reconstructParMesh not working with an axisymetric case francesco OpenFOAM Bugs 4 May 8, 2009 06:49


All times are GMT -4. The time now is 07:58.