Dynamic Mesh _ Rotational Motion of a Rigid Plate

January 29, 2007, 08:03

Dear FLUENT6.2 user;

Consider a thin rectangular plate that rotates around one of its edges. In 2D, this problem is simplified to a line that rotates around one of its ends. For a spesific purpose I want to use dynamic mesh capability of the software. What UDF function should I use to describe this motion? I think that Using CG_motion function, leads to a translational motion of the plate not rotational.

Many thanks for your kindly attention,

ROOZBEH

January 29, 2007, 08:23

Hi,.. You can dothis without udf, you can write a profile.. use time and z coordinate. will provide you the profile file if required.

January 30, 2007, 00:02

This profile may help you...

((wall point 3) (time 0.001 0.01 0.1) (theta_z 0 -0.397 -4.367) )

January 29, 2007, 08:03	Dynamic Mesh _ Rotational Motion of a Rigid Plate	#1
ROOZBEH Guest Posts: n/a	Dear FLUENT6.2 user; Consider a thin rectangular plate that rotates around one of its edges. In 2D, this problem is simplified to a line that rotates around one of its ends. For a spesific purpose I want to use dynamic mesh capability of the software. What UDF function should I use to describe this motion? I think that Using CG_motion function, leads to a translational motion of the plate not rotational. Many thanks for your kindly attention, ROOZBEH

January 29, 2007, 08:23	Re: Dynamic Mesh _ Rotational Motion of a Rigid Pl	#2
pinks Guest Posts: n/a	Hi,.. You can dothis without udf, you can write a profile.. use time and z coordinate. will provide you the profile file if required.

January 30, 2007, 00:02	Re: Dynamic Mesh _ Rotational Motion of a Rigid Pl	#3
pinks Guest Posts: n/a	This profile may help you... ((wall point 3) (time 0.001 0.01 0.1) (theta_z 0 -0.397 -4.367) )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic Mesh on Pintle type injector.	herntan	FLUENT	16	September 4, 2020 08:27
pls help. mesh collapsed with dynamic mesh.	wlt_1985	FLUENT	2	May 7, 2020 10:42
3D valve motion but no mesh motion with smoothing	slaol2	FLUENT	1	September 22, 2011 18:06
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
Dynamic Mesh Problem - please help!	Hila	FLUENT	0	August 19, 2006 04:19