CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

maximum value of skewness for turbomachinery-lets

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 31, 2007, 06:40
Default maximum value of skewness for turbomachinery-lets
  #1
sam
Guest
 
Posts: n/a
hey every body As a cfd user i am aware that there should be no negative volume in domain. We may consider negative volume is that volume which has skewness 1 or more than one(my own definition)

Now i want the comments of all poeple who are working on complex geomtries specially turbomachinery that what should be the maximum value of skew ness and in how many cells. Keeping in view that meshing is very much complex in these goemetries

and .................... I would like to know that how to control the skewness.

regards
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] How to improve skewness? em02131 ANSYS Meshing & Geometry 11 April 7, 2015 13:22
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
Maximum cell skewness atothep ANSYS 2 August 4, 2011 08:48
Maximum Cell Skewness killtimm FLUENT 0 June 27, 2010 08:34
Severe nonorthogonality and severe skewness problem qtian OpenFOAM Running, Solving & CFD 2 January 22, 2008 19:47


All times are GMT -4. The time now is 13:32.