|
[Sponsors] |
February 1, 2007, 01:41 |
FLOATING PRESURE OPTION
|
#1 |
Guest
Posts: n/a
|
Hi
I have a closed cylinder -piston arrangement and would like to compress the fluid inside . The Floating pressure option seems to be only available if I specify the segregated solver and an ideal gas. i am using a UDF(for movement of piston) to compress the gas.This only works with coupled solvers. Is there anyway to force the floating pressure option IN COUPLED option ? oR IS ANY OTHER OPTION AVAILABLE FOR COUPLED ONE ? thanks in advance AMMI |
|
February 1, 2007, 03:07 |
Re: FLOATING PRESURE OPTION
|
#2 |
Guest
Posts: n/a
|
in this proublem,first of all how much pressure rise u want, if the pressure rise in compression is more then only you have to use coupled solver, for normal pre rise no need of coupled solver, segregated solver is sufficient
there is lot of prblm with courant no in coupled solver,read the manualm carefully |
|
February 1, 2007, 03:12 |
Re: FLOATING PRESURE OPTION
|
#3 |
Guest
Posts: n/a
|
in this proublem,first of all how much pressure rise u want, if the pressure rise in compression is more then only you have to use coupled solver, for normal pre rise no need of coupled solver, segregated solver is sufficient
there is lot of prblm with courant no in coupled solver,read the manualm carefully |
|
February 1, 2007, 05:05 |
Re: FLOATING PRESURE OPTION
|
#4 |
Guest
Posts: n/a
|
hi thanks for reply
Their is a large rise in pressure (it is very essential to get the desired result) in compression.so coupled is required. would u like to suggest any alternetive method ? ammi |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 01:13 |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Simulation of a single bubble with a VOF-method | Suzzn | CFX | 21 | January 29, 2018 00:58 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 04:05 |