CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

wall slip boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 6, 2007, 04:12
Default wall slip boundary condition
  #1
Federico
Guest
 
Posts: n/a
Hi to everyone, I want to impose slip flow at the wall for simulating rarefied gas flow, and I saw that the option Low-Pressure Boundary slip is available in the viscous model menu, but I also saw that one can use it only with a Segregated solver, while I want to use a Coupled Solver. How can I do? Thank you!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
Domain Imbalance HMR CFX 5 October 10, 2016 06:57
natural convection mehrdadeng CFX 10 February 25, 2011 06:25
Wall boundary condition in cylindrical co-ordinate shekharc Main CFD Forum 3 December 2, 2009 09:20
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 01:10.