CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Difficult to perform YPLUS grid adaption....

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 11, 2007, 01:46
Default Difficult to perform YPLUS grid adaption....
Posts: n/a
Sponsored Links
My case is a two-phase system. The YPLUS in my case is about 20. So, I decided to reduce it by YPLUS adaption.

In doing this, I set the "MAX allowed" to be 1.0. When I perform the YPLUS grid adaption for the continous phase or dispersed phase. The following error always occurs. So, I finally failed to adapt the grid. What is the reason? Please advise. Thanks in advance.

================================================ Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: ()

  Reply With Quote
Sponsored Links


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grid adaption Mohsin FLUENT 1 August 4, 2010 04:16
Grid Adaption usman FLUENT 2 June 6, 2008 08:47
Mesh adaption & yplus Aloise CFX 0 December 13, 2006 18:22
Sensitive y+ grid adaption Marc FLUENT 0 December 2, 2005 11:49
Highly exothermic reaction and grid adaption MN FLUENT 1 January 15, 2004 11:29

Sponsored Links

All times are GMT -4. The time now is 05:50.