Where is the " VELOCITY-INLET" option?
When using the Gambit(ver2.1.6) to generate the grid for FUENT5.0/6.0, why I can not find the option of VELOCITY-INLET?
Could you explain WHY? |
Re: Where is the " VELOCITY-INLET" option?
if you have selected the solver properly, then the option is in the bottom of the list and you can not properly see becuase some part of the list may not be visible because of taskbar of computer at the bottom. (just guessing).
|
Re: Where is the " VELOCITY-INLET" option?
Hi,Zxaar,
Sorry. you are right. Now I got it. Thanks. |
Re: Where is the " VELOCITY-INLET" option?
The velocity inlet at the bottom of the list , actually irritates me also just for the same reason that I have to put the task bar to autohide for it. This is irritating but couldn't help.
|
Re: Where is the " VELOCITY-INLET" option?
instead of auto hiding u can do it this way, just select any other boundary condition (say pressure inlet) and again click the boundary condition, this tym u will see that the velocity inlet is visible.
|
Re: Where is the " VELOCITY-INLET" option?
yes agreed with Rizwan
|
Re: Where is the " VELOCITY-INLET" option?
I have this problem too.is there any better way out? can we change the setting of the monitor? I really don't know how to deal with the simulated X-window system.
|
Re: Where is the " VELOCITY-INLET" option?
instead of auto hiding u can do it this way, just select any other boundary condition (say pressure inlet) and again click the boundary condition, this tym u will see that the velocity inlet is visible.
|
Re: Where is the " VELOCITY-INLET" option?
I agree with Rizwan and his method is sufficiently simple. Here I just want to add one point. When selecting the other TYPE of boudary condition, please try the lowest (or lower) one, then the VEOCITY-INLET will be visible. However, if you select the toppest one like AXIS, you might still not be able to find the VEOCITY-INLET option.
In summary, two steps: (1)try firstly the other boundary condition at "the lowest option" you could reach at current operation status; (2) switch to the VEOCITY-INLET which you are looking for. I think other techiques are not very neceesary. However, we have reason to request the Gambit company to improve this inconvenience and to make it natural from custom utilization viewpoint. Good luck, and thank you again,zxaar and Rizwan. |
Re: Where is the " VELOCITY-INLET" option?
Regards good luck for ur work frenk
|
All times are GMT -4. The time now is 22:24. |