CFD Online Logo CFD Online URL
Home > Forums > FLUENT

how to display the stream line

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 14, 2007, 13:47
Default how to display the stream line
Posts: n/a
hallo, everyone,

I have a problem with displaying the stream line in 2D.

I know, I can use the "stream function" in "Contours" to display the stream line. But the maximum of the level is 100. But this refers to the whole region

Is there anyone know, how can I disply it in a certain region more exactly, i.e. near the wall?
  Reply With Quote

Old   February 21, 2007, 09:54
Default Re: how to display the stream line
Posts: n/a
Hi from contour panel uncheck auto rang check clip to range write down the max and min value of stream functiom say if its range 0-->10 you select say 0-->1

i hope these useful Khairy-Egypt
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 23 August 5, 2015 02:09
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 09:48
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16

All times are GMT -4. The time now is 04:27.