to whom interested in doing a paper
Hello , I was wndering if i can find someone to work with me on a paper about the CFD and simulating using fluent. we ca agree on a topic ; reply if interested
|
Re: to whom interested in doing a paper
sure. Tell me your email id
|
Re: to whom interested in doing a paper
Me too
|
Re: to whom interested in doing a paper
Just contact me.
|
Re: to whom interested in doing a paper
As there are many students..i think we can form multiple groups...what do u say??
|
Re: to whom interested in doing a paper
ywah why not ! good idea, so can everybody show his experience in the CFD field and in the dynamic mesh anayssi ; also we can share the topics ;
|
Re: to whom interested in doing a paper
Ok..it sounds like a good idea..
Lets do 1 thing..first list out the area of interest of each one..so that we can form groups and come with a topic easily.. Mine are multi-phase and dynamic meshing.. Shanti |
Re: to whom interested in doing a paper
good ; my interest is : CFD and dynamic meshes using fluent softwares , anything related to this ; I have an interest in doing dynamic meshes for the wind turbine ,we can choose a model and analyse our results .. reply if interested ; I know Fluent,Gambit,Matlab,C++
|
Re: to whom interested in doing a paper
It sounds interesting. I also know gambit, fluent, C and a little of matlab..
|
Re: to whom interested in doing a paper
It sounds interesting. I also know gambit, fluent, C and a little of matlab..
|
Re: to whom interested in doing a paper
ok , i will try tmrow to get a 3d modl of the winf=d turbine , we would start workin on itif u agree. it needs a lot of work ,since it is dynamic meshes ,
|
Re: to whom interested in doing a paper
ok , i will try tmrow to get a 3d model of the wind turbine , we would start workin on it if u agree. it needs a lot of work ,since it is dynamic meshes ,
|
Re: to whom interested in doing a paper
Even not with the one topic, we could select out,say 3 research topics,to cope with. And all members are to join the group will try to test and follow all these topics; and form effective internal discussion and contributions.
How do you think? For me, I am very interested in multiphase and dynamic meshing. Nontheless, the topic of turbine blade is not so interesting to me, because it is far from my professional interest. Anyway, I agree well with this proposal from Hussein. So, a suitable way of organizing seems very important. |
Re: to whom interested in doing a paper
I agree with Frenck.
|
Re: to whom interested in doing a paper
I have a PhD in Mech. Eng with focus on CFD. Have published some papers already. Shoot me an email if you need any help.
|
Re: to whom interested in doing a paper
Hi,Sonia,
What is your research domain? I would like to know what you have done in CFD. Could you give me some slected CFD papers published by you or provide a path for me to search your paper directly through the websites like sciencedirect.com etc? Thanks in advance. |
Re: to whom interested in doing a paper
Please answer this :
research interests : softwares : email id (optional): Topics interested in : my answers are : research interests : CFD, modeling solidification process softwares :Gambit , Fluent ,Matlab , C++ email id (optional):haa72@aub.edu.lb ; abousaleh85@gmail.com Topics interested in : Dynamic meshing of the blade of wind turbine , simulation nad anlyssis ; multiphase.... |
Re: to whom interested in doing a paper
If you each and every thing, then why you want to make group.
|
Re: to whom interested in doing a paper
sam , sorri i didnt mean by my post that i am each and everything , i ma just saying my abilities in programming , so that we can work together ONLY . As i said in the first time , i DO NEED sm1 to work with , u r welcomed , u can contactf sure me via my email , or u can give me ur email and i willl contact y; sorry
|
Re: to whom interested in doing a paper
also sam , i sent u the first private message in which i mentioned my email ids , you can contact me and we can divide the work and start workin early ; again my email id : haa72@aub.edu.lb
gmail : abousaleh85@gmail.com regards |
Re: to whom interested in doing a paper
Dear Freind, I did not mean it that way. I had just a thought that if someone know then he can do it easily, then why to opt for difficult rout. the problems lies here
1. Comunication through net is cumbersome 2. Many things will not be well understood via email. 3. What would be procedue to do work. 4. who will provide geomtry, computer power and software. 5. Finance 6. who will get credit of work 7. Will you go into legal contract. 8. If yes then who will make sure that the contract will be respected once work is finished. Thanks |
Re: to whom interested in doing a paper
it seems that i misunderstood whta u said in u last message ; Concerning financilayy i dont care .I have the softwares in my PC , my PC is good for simulation quosmio ; I will provide the geometry; At the ends we r student and don not need for legal contract; and yeah working is cumbersome , but it is good to share information and to work with other sthata we dont know for the first time ;sharing experience;
|
Re: to whom interested in doing a paper
yes me too..
|
Re: to whom interested in doing a paper
Yes, i am interested in doing a paper. DO let me know the content of the paper..cheers
|
Re: to whom interested in doing a paper
I could be interested.
I am not a student, I work in a technological center. I am specialistic in meshes over 10 million elements, heat transmission and turbulence. I cannot speak abaut concrete projects because they are confidential. |
If anyone have a license for FLUENT please email me at hosseinali.ir@gmail.com with the subject "FLUENT license", I have a paper ready for publication and need someone to have a license to be a coauthor.
|
hi guys, count me in.
research interests : fluent of ....anything ...simple^_^ softwares : fluent gambit email id: zjbwow@sohu.com Topics interested in :hydraulic fluid analysis btw, do your guys have MSN or something? we can talk online. |
friends.,
Include me too. research interests: Reacting/Non-reacting multiphase flow systems:: softwares: gambit, fluent, c, matlab, techplot e-mail id: satheeskannan@gmail.com topics interested in: Modeling industrial equipments(multiphase,reacting/non-reacting... anything is ok with me) |
All times are GMT -4. The time now is 15:48. |