|
[Sponsors] |
March 4, 2007, 05:46 |
Coal water mixture
|
#1 |
Guest
Posts: n/a
|
Hello, I have a problem about simulation coal gasification... I use pulvurized coal 40 and 50 micron,that contain 58% coal and 42% water that formed slurry. How to model it?? Thanks
|
|
March 6, 2007, 22:30 |
Re: Coal water mixture
|
#2 |
Guest
Posts: n/a
|
You can use species transport model. Use water as one inlet and air as secondary inlet. You can also use non-premix combustion with two mixture fraction approach.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Mixture of water and oil in the centrifugal separator | teck0516 | Main CFD Forum | 0 | July 21, 2011 00:56 |
How to set 2 phases in Fluent: Mixture & Water | JW | FLUENT | 7 | May 26, 2006 10:10 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |
uptodate water distribution network | fredius,magige,tanzanian,(e.a) | Main CFD Forum | 0 | January 27, 2002 07:10 |