CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   Zone types---->Solid (

Shamoon March 15, 2007 12:06

Zone types---->Solid
In GAMBII there is an option in specifying continuum types of Solid or Fluid. I have a geometry through which air is passing and flowing on the outer side also (like a picture frame placed in Wind tunnel). Problems to ask are: 1) Should I take the geometry as a volume and mesh it and then specify it as a volume? 2) Shuld I take the faces of the geometry only and specify them as wall? If I do this and specify the oruter domain as a volume then in Fluent only the outer volume is shown and not the geometry!!!!!1 Kindly help me SHAMOON

All times are GMT -4. The time now is 22:22.