CFD Online Logo CFD Online URL
Home > Forums > FLUENT

3Dblade mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 26, 2007, 14:43
Default 3Dblade mesh
Posts: n/a
Hi, I'm trying to mesh a flow passage over 3D blade domain. The blade is twisted and its cross-section changes with the heigth.The flow domain is small, inlet is placed one chord length upstream and outlet two chord lengths downstream the blade, the other boundaries are offsets of the blade surface and the flow has a 90deg turn. I created a mesh on of the blade surface and attached a b.l. mesh. So far I was not able to mesh the entire volume using the different schemes. Any suggestion? Should I divide the volume in blocks?

  Reply With Quote

Old   March 28, 2007, 00:47
Default Re: 3Dblade mesh
Posts: n/a

Which software do you use, Gambit?
  Reply With Quote

Old   March 30, 2007, 17:20
Default Re: 3Dblade mesh
Posts: n/a
yes, I'm using Gambit. Anyway, dividing the volume in blocks I was able to mesh it. Thank you.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 44 April 14, 2016 06:41
Converting Starccm+ mesh Ladnam OpenFOAM 0 September 14, 2011 06:30
Meshing aifoil in ICEM student123a ANSYS Meshing & Geometry 13 December 8, 2010 11:40
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49
basic of mesh refinement arya CFX 4 June 19, 2007 12:21

All times are GMT -4. The time now is 05:41.