CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Porous Media

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 27, 2007, 10:56
Default Porous Media
  #1
efra
Guest
 
Posts: n/a
Hello everybody!

I am trying to simulate two layers of stents (fine spirals) using Porous Madia approach. One spiral goes in one direction and the second in the oposite direction, it will give a square grid.

Both spirals will reduce the flow into a cavity, and I am simulating the spirals (porous media) only at the entrance of the cave.

My question is How to set this kind of geometry in fluent, I mean which vectors direction do I have to take for the first and second porous zone?? by the way the cavity is attached to a pipe (3d) and the porous zones are curved.

Is it possible to do that in Fluent???

I have prepared the geometry in Gambit, but I am havins problems to set the case in Fluent.

I will appreciate your answers.

Efra
  Reply With Quote

Old   April 10, 2007, 02:45
Default Re: Porous Media
  #2
narges
Guest
 
Posts: n/a
hello i can not prepared the porous media geometry in gambit. my project is flow under ground in aquifer.please help me for modeling in gambit.
  Reply With Quote

Old   April 10, 2007, 02:46
Default Re: Porous Media
  #3
narges
Guest
 
Posts: n/a
hello i can not prepared the porous media geometry in gambit. my project is under ground flow in aquifer.please help me for modeling in gambit.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiphase Porous Media Flow - Convergence Issues VT_Bromley FLUENT 7 May 14, 2020 17:34
Porous media setup issues in Fluent Bernard Van FLUENT 29 January 26, 2017 05:09
How to model granular flow through porous media Axius FLUENT 2 August 7, 2014 11:34
species mass source in porous media ? PK FLUENT 0 February 16, 2007 12:12
porous media: Fluent or Star-CD? Igor Main CFD Forum 0 December 5, 2002 16:16


All times are GMT -4. The time now is 02:21.