CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how to set radiation model for ch4 air combustion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 8, 2007, 13:45
Default how to set radiation model for ch4 air combustion
  #1
venkat
Guest
 
Posts: n/a
hi,

am presently simulating methane air mixture combustion in a model combustor problem...its non-premixed diffusion case...the domain is similar to example in tutor files.....

the case is converged and the temp are around 2370k....can any one tell how to consider the radiation effects in this modelling.....

as per the domain p1,dtrm and DO models can b considered...so please tell me how to set the radiation models......

  Reply With Quote

Old   May 9, 2007, 01:14
Default Re: how to set radiation model for ch4 air combust
  #2
ssj
Guest
 
Posts: n/a
Dear venkat,

go through the fluent manual you will get some clear idea. as per you rdomain use DO model which is applicable to all domains but it is computationally expesive. P1 model is used when opticle thickness is >1. all the best.
  Reply With Quote

Old   May 9, 2007, 11:13
Default Re: how to set radiation model for ch4 air combust
  #3
venkat
Guest
 
Posts: n/a
hi thank u ssj,

i hav tried but not getting idea how to start...i found only theory abt those models...but not step by step procedure....

and let me know one more thing...do i hav to set the radiation on from the starting of simulation...that is right from first iteration after reading the mesh file in fluent...

.......presently i hav converged the case....and the temp is 2370 for methane air combustion...equivalence ratio is one...can u comment abt this result.....plz help me as early as possible.......thanks in advance

(the problem is non-premixed diffusion flames)

bye venkat

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Nonpremixed Combustion Model for Coal Gasification C.Y.Ler FLUENT 2 April 29, 2014 09:51
Liquid rocket engine non-premixed combustion model Erik FLUENT 2 November 28, 2013 15:09
Questions for a species transport problems (snapshots attached) aleisia FLUENT 2 October 9, 2011 05:40
DO radiation model in combustion Shankar FLUENT 0 November 1, 2004 18:54
HOW TO SET CONSTRAINTS FOR COAL COMBUSTION MODEL YNW CFX 0 February 25, 2003 04:33


All times are GMT -4. The time now is 05:14.