|
[Sponsors] |
June 12, 2007, 06:32 |
About radiation model
|
#1 |
Guest
Posts: n/a
|
I used DOM, WSGGM, equilibrium combustion model(non premixed) for pure oxygen combustion.
The temperature profile continuously decrease toward downstream, but on the other hand the absorption coefficient increase to flat region. A steeply flat region exist from middle to outlet. what is the problem? The flat region of absorption coefficient which is max. 1.4 is also the same as that of temperature profile which is max. 2900K. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 07:18 |
How model radiation of both solid wall and fluid£¿ | Harry Qiu | FLUENT | 2 | February 3, 2013 23:04 |
Help: Radiation model | MANOJKUMAR | FLUENT | 4 | November 24, 2005 02:45 |
definition difficulty-->DO radiation model | Harry Qiu | FLUENT | 0 | March 29, 2001 09:19 |
RE: Radiation model | Ashutosh Joshi | FLUENT | 1 | January 30, 2001 10:50 |