|
[Sponsors] |
June 14, 2007, 21:58 |
duct- Fletcher's technical note
|
#1 |
Guest
Posts: n/a
|
Hi all,
I'm doing simulation for a duct with AR=1 and comparing the results to the NASA technical Note by Fletcher (Experimental Investigation of Lift, Drag, and Pitching Moment of Five Annular Airfoil. Right now, this is the detail of my simulation: 1) Duct based on Clark Y 2) M=0.13, V=44.2 m/s 3) Grid: 1 million 4) boundary: 20c (chord)-> pressure far-field, duct->wall, no slip 5) solver: coupled-implicit 6) viscous: S-A 7) alpha: 0 to 90 with 10deg interval 8) energy equation included because I use ideal gas (Fluent do it automatically) the problem now is that the results deviate quite far from the experimental results. I have tried other BC, viscous, etc yet the results are still bad. Can somebody help me? Thank you in advance |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Specifying nonuniform initial condition | msyaml | OpenFOAM Running, Solving & CFD | 65 | April 25, 2016 04:23 |
usrbinld cannot find | doug | OpenFOAM Installation | 19 | November 4, 2010 14:15 |
OpenFOAM-1.5-dev svn revision 1438: libOpenFOAM does not compile in SP | 4xF | OpenFOAM Bugs | 3 | October 16, 2009 05:35 |
Elements that limit the Courant number | skabilan | OpenFOAM Running, Solving & CFD | 9 | July 3, 2008 12:07 |
A stupid question | luckyluke | OpenFOAM Running, Solving & CFD | 14 | August 13, 2007 04:25 |