CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problems with User Defined Scalar

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2007, 15:55
Default Problems with User Defined Scalar
  #1
Alberto Cuoci
Guest
 
Posts: n/a
Hi,

I am trying to solve an additional transport equation using 1 UDS. When I use the non-premixed combustion model (flamelets), FLUENT does not modify the diffusion coefficient for the additional UDS. When I change the corresponding value in the Materials Panel there is no effect on the simulation; the value remains 1 kg/m/s, which is the default value. I also tried to define an external UDF ( DEFINE_DIFFUSIVITY(name, c, t, i) ) to change the default value, but the result is the same.

Do you have any suggestions?

Thanks, Alberto
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF to modify the value of a user defined scalar Raja Banerjee Fluent UDF and Scheme Programming 5 March 5, 2019 15:19
dieselFoam problem!! trying to introduce a new heat transfer model vivek070176 OpenFOAM Programming & Development 10 December 24, 2014 00:48
OpenFOAM static build on Cray XT5 asaijo OpenFOAM Installation 9 April 6, 2011 13:21
solving passive scalar by user function in AVLFIRE huyp Main CFD Forum 0 September 4, 2008 11:21
How to store my own information to a USER SCALAR? LI Ying CFX 1 August 15, 2001 17:55


All times are GMT -4. The time now is 11:38.