CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

UDS Species calculation is DIFFERENT!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 28, 2007, 12:44
Default UDS Species calculation is DIFFERENT!
  #1
Davis
Guest
 
Posts: n/a
Hi All,

I did some modeling with UDS for the species mass fraction because later I want to alter the convective flux part. But, before that I would like to check the validity of this calculation compared to direct species calculation (embedded in Fluent). I found big difference. Has anybody exprienced it before? I also noticed that the diffusvity coefficient in the UDS needs to be multiplied by rho to get the consistent unit.

Thanks.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDS for residnce time calculation Vidya FLUENT 2 August 7, 2006 20:28
Species transport eqn using UDS Vishal FLUENT 0 March 22, 2006 00:00
Warning 097- AB Siemens 6 November 15, 2004 05:41
Calculate net species/ UDS flux PK57 FLUENT 3 August 4, 2004 10:59
Multiple species and UDS source terms Ale FLUENT 2 September 9, 2002 04:45


All times are GMT -4. The time now is 18:29.