CFD Online Logo CFD Online URL
Home > Forums > FLUENT

flow time plot units

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 2, 2007, 13:38
Default flow time plot units
Posts: n/a

for unsteady simulations, is the time indicated in the convergence history of a variable through a surface monitor measured in seconds? I'm monitoring temperature at the outlet of my domain, the x axis indicates the time from the beginning of the simulation (Flow time), the surface monitor indicates (Time=3.51e+04), is that seconds??

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to plot flow rate over time with Paraview sekunda OpenFOAM Paraview & paraFoam 16 March 17, 2016 07:06
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
Physical Reason for stability of Implicit Schemes? radhakrishnan Main CFD Forum 25 December 7, 2000 16:25

All times are GMT -4. The time now is 05:06.