CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

DPM - Why do the particles not vanish?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 25, 2007, 03:43
Default DPM - Why do the particles not vanish?
  #1
Johannes
Guest
 
Posts: n/a
Hi there,

when simulating the injection of fuel into a combustion chamber, I've got a problem. The particles mass and diameter do not reach zero. The particles size was about 25E-06 m and only reaches about 2.5E-06m. Why is this so? The temperature is high enough and the length of the computational domain should be big enough to let all particles to evaporate. There seems only to happen evaporation at the beginning and then it stops. Another problem is, that the particles minimum temperature does not match my initialization temperature. I initialize the particles with a temperature of 293.15 K into hot air of about 800K. Nevertheless the lowest temperature of the particles in the particle tracking modus are about 370 K. I would be glad, if someone can help me.

Greetings, Johannes.
  Reply With Quote

Old   June 25, 2007, 12:51
Default Re: DPM - Why do the particles not vanish?
  #2
sanjay patel
Guest
 
Posts: n/a
sir could u just describe me ur whole work....i'm very much interested in the simulation of fuel injection system for combution in an engine. i'm a student at iit roorkee (India)
  Reply With Quote

Old   June 26, 2007, 04:15
Default Re: DPM - Why do the particles not vanish?
  #3
Johannes
Guest
 
Posts: n/a
Sorry, I'm not allowed to describe my work in detail, but I'm simulating the vaporization of fuel (293.15K) injected into hot air at about 870K. The temperatures of the particles rise at a reasonable rate. First till the niveau of vaporization and then further on. But I don't get it, that the particles don't evaporate till they are gone, because the time is more than enough. But after decreasing their diameter till about one tenth of their starting size, they seem to stop vaporizing.
  Reply With Quote

Old   June 26, 2007, 04:26
Default Re: DPM - Why do the particles not vanish?
  #4
Johannes
Guest
 
Posts: n/a
Just some more information:

mixture material: fuel-oil-air droplet material: fuel-oil-liquid

steady Discrete Phase Calculation no breackup model
  Reply With Quote

Old   June 26, 2007, 08:22
Default Re: DPM - Why do the particles not vanish?
  #5
rana
Guest
 
Posts: n/a
i am getting lots of particles as ABORT can anyone tell me what is the cause of this and what can be the probable remedy ?

  Reply With Quote

Old   June 26, 2007, 10:01
Default Re: DPM - Why do the particles not vanish?
  #6
ritmat
Guest
 
Posts: n/a
i know that lost means something wrong with geometry but never see (yet) abort. sorry
  Reply With Quote

Old   June 26, 2007, 17:32
Default Re: DPM - Why do the particles not vanish?
  #7
rana
Guest
 
Posts: n/a
yes, thats my problem..dont know why i am getting so much abort did u take ur fluid as water or air ? are u doing unsteady tracjking or steady ?

  Reply With Quote

Old   June 27, 2007, 04:00
Default Re: DPM - Why do the particles not vanish?
  #8
ritmat
Guest
 
Posts: n/a
my gas is flue gaz so gas from combustion of wood so it is not totally air. My tracking is steady and i am working in steady flow as well. Did you try to increase number of step in the tracking parameters? Are you sure as well that the solution for your flow are converged before to inject your particules? Is your particules are interfering with your flow?
  Reply With Quote

Old   June 27, 2007, 06:40
Default Re: DPM - Why do the particles not vanish?
  #9
rana
Guest
 
Posts: n/a
>> Are you sure as well that the solution for your flow are converged before to inject your particules? how do we do that ? just gas/continuos phase we have and solve in single phase eulerian & check for the convergence right ? i did that.. if there's anythign else, do tell me also: in the inlet boundary condition, there is one option for velocity. this velocity refers to which phase (conntious or the tracking phase) ?

in the point properties under injection, what are the values u r giving for 'velocity' and 'total flow rate' ?

please do reply..

  Reply With Quote

Old   June 27, 2007, 06:46
Default Re: DPM - Why do the particles not vanish?
  #10
ritmat
Guest
 
Posts: n/a
to check convergence you should use residual as well as if your mass flow and temperature are the outlet become stable. inlet boudary condition are for the flow. The inlet velocity for particule has to be applied in your injection. i dont get why you need exactly my value just try any value
  Reply With Quote

Old   June 27, 2007, 15:54
Default Re: DPM - Why do the particles not vanish?
  #11
sanghals
Guest
 
Posts: n/a
HELLO

i am working in a big company base in greece, we try to test the code some years ago for buying it and we had the same problem.... we never solve that....

if you tell me what is not working then it would be good for me....

best regards
  Reply With Quote

Old   June 29, 2007, 09:32
Default Re: DPM - Why do the particles not vanish?
  #12
ritmat
Guest
 
Posts: n/a
hi rana I got some abort particule as well. I track some of my particules and actually i saw that for me it appeared in some region closed to walls in dead zone where particules was probably in equilibrium. So the residence time is too big and so that the solver cannot resolve it it is why they become abort. To resolve you have to check your particule by tracking them and maybe change the DPM boundary conditions at this level. Hope its help
  Reply With Quote

Old   July 6, 2007, 12:19
Default Re: DPM - Why do the particles not vanish?
  #13
R.
Guest
 
Posts: n/a
The DPM material's volatility needs to be 1.0 (100%) for the entire droplet to evaporate. (Materials panel, DPM phase)

If its 0.9, then 10% of the injected mass does not evaporate, and the particle is tracked until it escapes, is trapped, or reaches the limit of steps defined in the DPM model panel.

To fudge it, you need to set the volatility to 1.0, and adjust the mass injected accordingly.

R.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Injection of specific number of particles in DPM DH FLUENT 12 March 16, 2016 22:04
Constant & independent velocity for DPM particles Wikie Fluent UDF and Scheme Programming 1 September 23, 2010 06:35
Extracting pressure of particles in DPM teymourj FLUENT 0 June 1, 2010 15:37
dpm and size of particles anissa FLUENT 1 July 20, 2009 14:36
DPM - do the particles affect the liquid? Nikhil Dani FLUENT 0 January 1, 2009 12:58


All times are GMT -4. The time now is 01:49.