|
[Sponsors] |
April 21, 2018, 07:01 |
Set up fluent solver for reacting flow
|
#1 |
New Member
Esmaeil Jabbari
Join Date: Dec 2014
Posts: 24
Rep Power: 11 |
Hi,
I am working on furnace simulation. In my model i set RNG turbulence, energy, DO radiation model and 2 set reaction for combustion and kinetic cracking consist of about 12 reaction in steady state. Unfortunately fluent case can not reach convergence or good results comparison to actual datas. I search some posts in cfd-online for setting up solvers (solution methods and control and multigrid solver for cycle type of pressure velocity species and ...). Also i have these errors: Divergence detected in AMG solver: species -> Increasing relaxation sweeps Divergence detected in AMG solver: temperature -> Increasing relaxation sweeps temperature limited to 5.000e+00003 in xxx cells... and etc. Mesh quality ~0.3 Aspect ratio ~15 Please help me until i slove this problem. Thanks Please help me, i need your assistance. Last edited by esi1520; April 21, 2018 at 10:05. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Periodic flow using Cyclic - comparison with Fluent | nusivares | OpenFOAM Running, Solving & CFD | 30 | December 12, 2017 05:35 |
set BC mass-flow-inlet via UDF and via GUI perform different result | sawa25 | FLUENT | 1 | February 25, 2015 00:51 |
Fluent Adjoint Solver for compressible flow | b.shuvayan | FLUENT | 2 | January 30, 2015 07:27 |
What the differences flow equation of Fluent 6.3 and Fluent 12.1 | opehterinar81 | FLUENT | 0 | August 19, 2011 11:55 |
How do I select solver options for external flow over an aircraft by fluent? | hadieliasi | FLUENT | 5 | May 2, 2011 03:54 |