CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Auto-range in TUI (https://www.cfd-online.com/Forums/fluent/45832-auto-range-tui.html)

Neo August 23, 2007 13:37
Auto-range in TUI
 
Hi

Anyone know how to turn on the auto-range toggle under contours in TUI? I looked through the help file but can not find any about it.

carno August 24, 2007 06:33
Re: Auto-range in TUI
 
commands,

display set contours gr y

display contour vm <Blanck line> <Blank line>

-----end of commands. Note the two black lines after second command. Those insures that the range is auto one.

Hope this helps.

uconcorde April 21, 2018 02:15
Quote:
Originally Posted by carno
;144814
commands,

display set contours gr y

display contour vm <Blanck line> <Blank line>

-----end of commands. Note the two black lines after second command. Those insures that the range is auto one.

Hope this helps.
Hi,

It is invalid to input <> <>. Anybody can help?

Thanks.

Dv


All times are GMT -4. The time now is 02:54.