CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

urgent need for help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 30, 2007, 15:16
Default urgent need for help
  #1
rosol
Guest
 
Posts: n/a
Hi all I have to model the flow and heat transfer in triangular channel .My problem is I dont able to mesh this channel when I mesh the adges and the faces the work is goen good but when I mesh the volume the fluent display an error message . Please can any one help me by guiding me to how to mesh the volumes with best regards and thanks
  Reply With Quote

Old   August 30, 2007, 17:17
Default Re: urgent need for help
  #2
Jonathan
Guest
 
Posts: n/a
do you have any bad elemeny? i mean with bad skew angle or something like this?

Meshing the faces, what kind of mesh are you using? have you tried a Map or Submap mesh? If you made a Pave mesh, try these ones.

Good Luck!
  Reply With Quote

Old   August 31, 2007, 01:20
Default Re: urgent need for help
  #3
rosol
Guest
 
Posts: n/a
I tried all type of mesh but the problem is the same the faces is meshed but the volume did not meshed .and the fluent disply error message about skewness .Not that my work is one microchannel i.e the dimension is very small in micron is that matter affect on the meshing thank you
  Reply With Quote

Old   August 31, 2007, 04:56
Default Re: urgent need for help
  #4
chandra manik
Guest
 
Posts: n/a
umm...meshing is hard stuff i believe u may choose wrong type meshing in face and volume correct me if i wrong
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Urgent - Polyflow - particle tracking visualization -Urgent shafaatht ANSYS 0 October 13, 2010 04:56
Urgent, Urgent, a UDF problem, PLEASE HELP!!! Max FLUENT 1 September 24, 2010 20:30
Urgent...urgent...plss!!! astronome FLUENT 0 October 16, 2009 07:17
tmerge urgent urgent jessica FLUENT 4 July 15, 2006 13:37
very urgent pleasade:Cl and Cd values for airfoil Liaquat FLUENT 2 April 27, 2006 12:20


All times are GMT -4. The time now is 16:49.