 |
 |
 |
|
|
|
[Sponsors] | ||||
Conduct initialization with a old mesh solution |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 1, 2007, 08:09
|
Conduct initialization with a old mesh solution
|
#1 |
|
Guest
Posts: n/a
|
Hi, everyone. I got a solution with grid 'gird-A'. Now I refine the boundary mesh and have a new grid 'grid-B' for the same geometry. Because the computation is time expensive and I don't want to start the new iteration from scratch. So can I start the new calculation with old 'grid-A' solution as the initialization? My fluent version is 6.3.26.
|
|
|
||
|
September 12, 2007, 07:06
|
Re: Conduct initialization with a old mesh solutio
|
#2 |
|
Guest
Posts: n/a
|
Yes you can using the file/interpolate option. There is also help available on the fluent users website also
|
|
|
|
||
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Convergence | Centurion2011 | FLUENT | 48 | June 15, 2022 00:29 |
| Non-physcial solution in the case of triangular mesh from interFoam | ata | OpenFOAM | 28 | September 4, 2016 12:59 |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 09:54 |
| grid dependancy | gueynard a. | Main CFD Forum | 19 | June 27, 2014 22:22 |
| [ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM | kawamatt2 | ANSYS Meshing & Geometry | 17 | December 20, 2011 12:45 |
Linear Mode
