CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Initialization after Adaption

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 4, 2007, 14:22
Default Initialization after Adaption
  #1
Shamoon
Guest
 
Posts: n/a
Hi I need to know that if I need y+ Grid adaption should I have to initilize teh soln again or continue from the last iteration

Thanks
  Reply With Quote

Old   September 4, 2007, 15:30
Default Re: Initialization after Adaption
  #2
Glenn
Guest
 
Posts: n/a
You can adapt the grid within FLUENT and continue with the same solution. No re-initialization needed. If muoltiple adaptations are needed, you should probably do one at a time, following with some solver interations in between adaptations. Give it a try!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FMG initialization query Mohsin FLUENT 6 November 2, 2016 03:02
Mesh Adaption in CFX. Kushagra Mittal CFX 1 August 31, 2011 08:17
Unstructured Mesh using Mesh adaption sidzishere CFX 1 May 31, 2011 10:18
compressor initialization paglia FLUENT 0 February 1, 2006 16:14
boundary adaption with geometry based adaption Kate FLUENT 0 October 9, 2005 10:44


All times are GMT -4. The time now is 05:20.