|
[Sponsors] |
Help needed... connect surfaces (connected in CAD) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 11, 2007, 13:53 |
Help needed... connect surfaces (connected in CAD)
|
#1 |
Guest
Posts: n/a
|
Hi all,
Here is my problem...: I'm designing a plane (with solidworks) and putting it in fluent. In my CAD design, the cockpit and the fuselage are separated. I've put mates to put them together, and everything's perfect in solidworks. The only problem is when I import it in Gambit. Here is a print screen of my problem: Any help appreciated ! Cyril P.S: Here is my dbs file: http://dl.free.fr/cj64E0Ils/Mk7.dbs |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 2 | March 11, 2009 02:34 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 0 | March 10, 2009 22:07 |
Courant no%23 and sharp corner in 3D | jam | OpenFOAM Running, Solving & CFD | 6 | November 18, 2008 08:21 |
Mesh: Surfaces not connected | Babs | FLUENT | 8 | September 17, 2007 05:29 |