CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with Volume split...!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 22, 2007, 04:00
Default Problem with Volume split...!
Posts: n/a
I am getting an error as.. . . . ERROR: ACIS error 8032 : inconsistant edge-face relatonships restoring the geometric model to the state before the current operation (if there is a positive number of default UNDO levels) Undone to: volume split "volume.1" volumes "volume.2" disconnected bientity keep. . . . can any one help me...? Thanks in advance...

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Problem with split option akshayygarg ANSYS Meshing & Geometry 29 March 25, 2014 01:00
Problem of negative volume Anam FLUENT 10 November 3, 2011 12:07
Volume Split by face Mohsin FLUENT 4 August 24, 2011 03:00
negative element volume problem in CFX/icem-cfd adam2008 CFX 7 April 18, 2010 18:26
[ICEM] negative mesh volume problem (icem-cfd/cfx) adam2008 ANSYS Meshing & Geometry 5 April 16, 2010 12:21

All times are GMT -4. The time now is 14:15.