CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

modelling inviscid 2D flow at high angle of attack

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 30, 2007, 09:44
Default modelling inviscid 2D flow at high angle of attack
  #1
Ferdinando
Guest
 
Posts: n/a
Hi there!

It happens that when I try to solve the inviscid incompressible flow around a 2D airfoil set at high angle of attack (say ~ 25 degrees) the solution shows a sort of ficticius separated boundary layer on upper surface or, if one prefers, there is no Kutta condition verified at trailing edge. Can anyone help me with this? Any suggestion on how I can obtain a solution similar to that coming from panel methods where the Kutta condition is explicitly imposed so that the solution does not depend on the value of angle of attack chosen?

Many Thanks

Ferdinando
  Reply With Quote

Old   October 30, 2007, 12:04
Default Re: modelling inviscid 2D flow at high angle of at
  #2
Chandra Manik
Guest
 
Posts: n/a
Dear Ferdinando Inviscid model refer to that fluid assume with no friction or shear stress, Kutta applied for non invisicd flow, try to make your model as turbulence or laminar (depend to reynold number)

  Reply With Quote

Old   October 30, 2007, 18:26
Default Re: modelling inviscid 2D flow at high angle of at
  #3
Charles
Guest
 
Posts: n/a
Yes, Chandra is right. This is not supposed to work! There is no point in trying to do high angle of attack calculations of an incompressible inviscid fluid. It doesn't exist, and if it gave the same answer for this as the panel code I would be really worried about Fluent.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
convegence problem with high angle of attack littlelz CFX 2 October 28, 2009 07:07
not convergence in high angle of attack in low reynold number nuimlabib Main CFD Forum 1 October 2, 2009 15:10
Advice on multi-phase flow modelling Martin Main CFD Forum 3 October 14, 2008 06:16
Modelling flow over airfoil at near stall angle Kelvin FLUENT 5 June 6, 2007 03:00


All times are GMT -4. The time now is 10:24.