CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Floating point Error while running MRF analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 18, 2007, 23:01
Default Floating point Error while running MRF analysis
  #1
Kashif
Guest
 
Posts: n/a
hi to all

i was trying to run the MRF analysis of propeller in Fluent 6.2 but after about 250 iterations Fluent reports a Floating point Error.

Can anybody guide me what could be the problem and what are the reasons of Floating Point error.

Thank u in advance for your time and consideration. Kashif
  Reply With Quote

Old   November 21, 2007, 02:15
Default Re: Floating point Error while running MRF analysi
  #2
Chee Onn
Guest
 
Posts: n/a
Reduce the cell skewness <0.75.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ercoftac centrifugal pump case study bug, Openfoam 1.6-ext (Floating point exception) ArianeJasmin OpenFOAM Programming & Development 1 April 4, 2012 15:11
floating point Mrak FLUENT 3 March 2, 2007 02:47
Floating point error Nabil FLUENT 2 January 19, 2007 06:30
Floating point Error message Jonathan FLUENT 2 January 16, 2007 05:07
floating point error when starting to iterate Ralf Schmidt FLUENT 1 June 2, 2006 07:00


All times are GMT -4. The time now is 07:14.