|
[Sponsors] |
September 8, 2013, 15:46 |
Convective Heat transfer issue
|
#1 |
New Member
Join Date: Mar 2012
Posts: 1
Rep Power: 0 |
Hello everyone,
We try to model heat exchange bewteen a fluid and a solid. In order to solve the viscous sublayer we use k-e model with enhanced wall treatement and our grid allow us to get y+ under 5 all along the exchange surface. We could solve solid and fluid problem together in Fluent but we wish to export HTC from Fluent and send it to Ansys Mechanical. Unfortunately, HTC is calculated using adjacent temperature and in our case we have Twall almost equal to T_adj_temp. The T_adj_temp isn't representative to Tbulk. Anyone know how we can get a better estimation of T_bulk ? Thanks ! Ensm18 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Heat transfer coefficient - what is waht | Stan | FLUENT | 28 | December 29, 2021 16:29 |
Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff | swahono | OpenFOAM Running, Solving & CFD | 10 | October 15, 2018 05:43 |
Heat Flux at wall in a conjugate heat transfer problem | Chander | CFX | 2 | July 9, 2011 22:22 |
Negligible Inertia and Convective Heat Transfer | Miky1020 | CFX | 2 | June 9, 2009 20:16 |
convective heat transfer coefficient | Fluu | Main CFD Forum | 3 | April 15, 2008 07:37 |