CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Gambit error on opensuse (https://www.cfd-online.com/Forums/fluent/47436-gambit-error-opensuse.html)

Alessandro February 26, 2008 05:08

Gambit error on opensuse
 
I installed GAMBIT without problems on openSUSE 10.3. However, when I start it it gives me the following error.

Starting /Fluent.Inc/gambit2.4.6/lnx86/gambit ... Gambit build SP2007051420. libxcb: WARNING! Program tries to unlock a connection without having acquired a lock first, which indicates a programming error. There will be no further warnings about this issue. libxcb: WARNING! Program tries to lock an already locked connection, which indicates a programming error. There will be no further warnings about this issue. gambit: xcb_lock.c:77: _XGetXCBBuffer: Assertion `((int) ((xcb_req) - (dpy->request)) >= 0)' failed.

Received exception: SIGABRT (abort signal)

Please send the GAMBIT.6617/jou and GAMBIT.6617/trn files to your local Fluent office or distributor. Also send a message including any relevant errors or warnings you see above in this window. You may wish to delete the temporary directory GAMBIT.6617 after sending the above files. ERROR: Please retain a copy of the GAMBIT.6617/jou, GAMBIT.6617/trn, and GAMBIT.6617/*.dbs files, any imported geometry and any relevant errors or warnings you see above in this window and contact support at your local Fluent office or distributor. Aborted

I tried to run the workaround:

export LIBXCB_ALLOW_SLOPPY_LOCK=1 but nothing changes

Thanks


All times are GMT -4. The time now is 11:50.