naca section simulation for different cavitation number

ishtiaque abir · June 1, 2017, 13:04

"How the simulation can be done by Ansys (fluent) around a naca(0021) for different cavitation number at a fixed angle of attack. Please help me in this regards with tutorials.

SPH_CFD · June 4, 2017, 11:47

Quote:

Originally Posted by ishtiaque abir

"How the simulation can be done by Ansys (fluent) around a naca(0021) for different cavitation number at a fixed angle of attack. Please help me in this regards with tutorials.

Please search "cavitation model in FLUENT".There are a lot of tutorials for you. It is quite easy to follow these tutorials and then continue with your own problem

ishtiaque abir · June 5, 2017, 01:52

Thank u very for your help... hope that can serve my purposes

Sent from my Symphony R100 using CFD Online Forum mobile app

June 1, 2017, 13:04	naca section simulation for different cavitation number	#1
ishtiaque abir New Member MAHDI-UL-ISHTIAQUE Join Date: May 2017 Posts: 6 Rep Power: 8	"How the simulation can be done by Ansys (fluent) around a naca(0021) for different cavitation number at a fixed angle of attack. Please help me in this regards with tutorials.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Decomposing meshes	Tobi	OpenFOAM Pre-Processing	22	February 24, 2023 09:23
[Other] Can't Shake Erros: patch type 'patch' not constraint type 'empty'	BrendaEM	OpenFOAM Meshing & Mesh Conversion	12	April 3, 2022 18:32
[snappyHexMesh] sHM layer process keeps getting killed	MBttR	OpenFOAM Meshing & Mesh Conversion	4	August 15, 2016 03:21
dsmcInitialise - dsmcFoam	archymedes	OpenFOAM Pre-Processing	94	July 15, 2016 16:14
Compressor Simulation using rhoPimpleDyMFoam	Jetfire	OpenFOAM Running, Solving & CFD	107	December 9, 2014 13:38

June 5, 2017, 01:52		#3
ishtiaque abir New Member MAHDI-UL-ISHTIAQUE Join Date: May 2017 Posts: 6 Rep Power: 8	Thank u very for your help... hope that can serve my purposes Sent from my Symphony R100 using CFD Online Forum mobile app